How to fit a hat size reducer
Is your hat a little too big? Our foam size reducers adjust it discreetly and take it down by up to one size. They come in pairs: depending on your head measurement, one may be enough.
Try before you stick
Slide the reducer under the inner band without removing the backing film, then try on your hat. This way you'll find the right spot, and know whether you need one or two reducers.
The 4 steps

1. Lift the inner band of your hat.

2. Peel the backing film off the reducer.

3. Stick the adhesive side onto the hat, under the band, as close to the seam as possible.

4. Fold the band back down: the reducer is invisible.
Where to place it
With one reducer: at the front, on the forehead, or at the back, wherever the hat feels too loose.
With two reducers: one at the front, one at the back, facing each other. If you have a long face, place them on the sides instead.
We recommend checking the fit of your hat before sticking the reducers: once they are stuck in, the hat can no longer be returned or exchanged.